Skip to content

Commercial ยท Jetting

Building drain scouring and video checks

Big buildings make big deposits: grease, scale, silt and roots. Water at high pressure removes them; a camera proves the line is clean.

  • Main building drains and laterals jetted wall to wall
  • Camera footage to show the before and after
  • Catch basins and parking lot drains flushed
  • Root intrusions and broken sections located and marked
Call (365) 517-7959

Talk to a plumber now.
No forms, no waiting list.

  • Licensed & insured (details on request)
  • Phones answered 7 days a week
  • Oshawa & Durham Region
  • Upfront diagnosis before work
Worker in high-visibility gear using a high-pressure water jet on wet pavement
High-pressure water at work: the same principle that scours grease out of a commercial drain.

Jobs that call for the jetter

  • Grease build-up in a kitchen or food-court line
  • Scale lining older cast iron
  • Sand and silt from floor drains in garages and warehouses
  • Fine roots that a cable keeps cutting but never clears
  • Ahead of a video run, so the lens sees bare pipe

Order of work on a jetting visit

  1. Find a cleanout or access point and confirm the line route.
  2. Run the camera first if the line has never been inspected.
  3. Feed the jetter hose with the nozzle suited to the blockage.
  4. Work upstream in passes, pulling debris back to the access point.
  5. Run the camera again and save the footage for your file.

What the camera can show

Video separates a soft plug from a belly that holds water, a crushed length or a joint that has slipped sideways. Jetting fixes the first. The others need a repair, and the footage lets an owner or manager decide on it with real evidence instead of a guess.

Safe work around a business

  • Access points opened only when the area is cordoned
  • Hoses routed away from customer paths
  • Water and debris captured, not left on floors

From our call log

Will high pressure hurt a fragile line?

We dial the pump down to suit the material. Badly cracked lines are assessed on camera first so we do not make a weak spot worse.

How a visit runs

  1. 1

    Call

    Describe the fixture, the floor and how old the building is.

  2. 2

    Look

    We pull the trap, the cleanout plug or the access panel before any price is given.

  3. 3

    Explain

    You hear what failed and what we would replace, in plain words.

  4. 4

    Fix

    Water off, old part out, new part in, joints supported.

  5. 5

    Test

    Full flow or full pressure, every joint checked dry.

Water on the floor right now?

Turn the main shut-off clockwise and ring (365) 517-7959.

Call (365) 517-7959
Call (365) 517-7959